Aircraft U Disk Plastic Mold

Aircraft U Disk Plastic Mold

The Part Name: aircraft U disk plastic mold Mold type: Plastic injection mold with cold runner. Part Material: ABS Locating Ring Dimension: φ100 KO Pattern: 200*200mm Sprue Radius: SR10.5 Ejection Type: Ejection pins, ejection sleeves. Mold Construction Description: Cold runner with sub gate, 2 plate mold with sliders, lifters, inserts, and shut off area. This procut is made of PC plastic material and it is one of the components of the reputation brand electronic parts. The mold construction is complicated and there are many inserts, sliders, lifters and ejector pins, so it has a very high technical requirement for mold design. The mold is a cold runner mold with the best water cooling system and the part can be molded by automatically. This part has very high size requirements, the defect showed below will not be acceptable, for example, weld line, dark spot , sliver marks, gas traps effect, visible ejection marks, deformation, short shot filling, burnt streaks, sink marks, flash, over dimension, under dimension, street crack etc, moreover, the product finishing surface must meet the requirements of MT11010.

Product Details

1. Part Name: aircraft U disk plastic mold

2. Plastic Material: PC 2407

3. Cavity Material: 1.2344 HRC48-52

4. Mold Life: 1000K shots or according to customers quantity condition to make it, then will save the cost for our customer.

5. Gate Type: Point Gate, Sub Gate, Side Gate, Valve Gate, Edge Gate, Tip Gate etc, the gate will according to the part structure and customer’s requirement.

6. Mold Base Standard: HASCO, DME, LKM local standard, and will according to customer’s requirements.

7. Standard of Mold Accessories: LKM, DME, HASCO, MISUMI, MEUSBURGER.

8. Hot Runner: YUDO, MOLDMASTER, HUSKY, INCORE, HRS, PETS etc, and will according to customer’s requirements.

9. Hydraulic Cylinder: MERKER or Chinese local brand etc, and will according to customer’s requirements.

10. Design Software: UG, CAD, Moldflow etc.

11. Machine: From 30T to 250T, total 25 sets machine.

12. Payment: T/T, to be negotiated.

13. Packaging: Wooden case with steel frame.

14. Mold Logo: Based on customer’s requirements.

15. After Sales Service: One year warranty.

 blob.png  blob.png

Nameaircraft U disk plastic mold
Plastic MaterialABS, PP, PA66, PA6, PPA, PE, TPV, TPU, LDPE, POM,PA+GF, PET, PMMA, PC+ABS, POM+GF, etc.
Mold Base Material1.2312, 1.1730, 1.2311, P20, etc.
Cayity & Core MaterialH13 HRC48-52, 1.2343, 1.2344, S136, 1.2083, 1.2767, NAK80, etc.
Mold Life1000K shots or according to customers quantity condition to make it, then will save the cost for our customer.
Cavity Number1 cavity, 2 cavities, 4 cavities, it is according to customer’s requirements.
RunnerCold runner or Hot runner.
Gate TypePoint Gate, Sub Gate, Side Gate, Valve Gate, Edge Gate, Tip Gate etc, the gate will according to the part structure and customer’s requirement.
Mold Weight450KG
Mold Base StandardHASCO, DME, LKM local standard, and will according to customer’s requirements.
Cycle Time28 Seconds
Standard of Mold AccessoryLKM, DME, HASCO, MISUMI, MEUSBURGER.
Design SoftUG, CAD, Moldflow etc.
File FormatsUG, CAD, Moldflow etc.
Injection Molding MachineFrom 30T to 250T, total 25 sets machine.
MOQ1 set
PaymentT/T, to be negotiated.
PackagingWooden case with steel frame.
Delivery Time(day)35 days T1, according to customer’s requirements.
OEM or ODMIs available
Mould LogoBased on customer requirements.
After Sales ServiceOne year warranty.


Previous:One Year Warranty Plastic Injection Mold Reflektor Chassis with PPA GF60 for Camera Next:Plastic Part Prototype

Inquiry